Local Hmi Functionality; Protection And Alarm Indication - ABB Relion 670 series Operation Manual

Section 4
Overview
Commands
Table 4:
Name
Menu
R/L
Clear
Help
Multipage
Function buttons
Table 5:
Name
Function
button
4.1.4

Local HMI functionality

4.1.4.1

Protection and alarm indication

Protection indicators
The protection indicator LEDs are Ready, Start and Trip.
Table 6:
LED state
Off
On
Flashing
24
Command push-buttons
Function buttons
Description
Executing the defined function: OFF, menu short cut or binary control.
The yellow and red status LEDs are configured in the disturbance recorder
function, DRPRDRE, by connecting a start or trip signal from the actual function
to a BxRBDR binary input function block using the PCM600 and configure the
Off , Start or Trip for that particular signal.
setting to
Ready LED (green)
Description
Auxiliary supply voltage is disconnected.
Normal operation.
Internal fault has occurred.
Description
• Moving directly to Main menu, if currently
in any other menu or view.
• Moving to the default view, if currently in
Main menu.
Changing the control position (remote or local)
of the device.
• When the R LED is lit, remote control is
enabled and local control disabled.
• When the L LED is lit, local control is
enabled and remote control disabled.
• When none of the LEDs are lit, both control
positions are disabled.
• Activating the Clear/Reset view.
Showing the help menu.
Opening alarm panel and selecting alarm page
from the view.
GUID-09CCB9F1-9B27-4C12-B253-FBE95EA537F5 v17
1MRK 500 127-UEN D
670 series
Operation manual