Fixing Unit Bracket Assembly
1
Table 4. Parts and Tools for Fixing Unit Bracket on CPE Outdoor
Category
Parts
Recommended Torque Value
Working Tools
2
Figure 11. Fixing Unit Bracket Assembly (1)
Screw (T25H)
3
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
To fix a unit bracket assembly on the CPE Outdoor
Ensure that the items mentioned in the table below are available.
Description
Unit Bracket Assembly
Fasteners
M5 × L14 SEMS (T25H)
M5 SEMS
• Torque Driver (20-90 lbfin)
• Screw Driver Bit (T25H)
• Screw Driver (T25H)
Unfasten the left/right side screws of unit bracket assembly by 0.2 in.
Fix the unit bracket to the fixing hole of the CPE Outdoor rear using fasteners
as shown in the figure below.
Confidential
Chapter 2 Installing System
1 Set
4 EA
25 lbfin (29 kgf·cm)
0.2 in.
0.2 in.
15