Identification Tag Attachment - Samsung 310 5G CPE Installation Manual

•
•
•

Identification Tag Attachment

This process involves attaching a marker cable tie, a nameplate, and a label to both
ends of a cable (connections to a connector) to identify the use of the cable and the
cabling path.
Follow these guidelines when attaching an identification tag.
•
•
When connecting the cables, always connect the ground cable first. If a worker
contacts the equipment, connects a cable, or performs maintenance without
connecting the ground cable, the system can be damaged or the worker may be
injured due to static electricity and short circuit.
When performing cable work for the system, proceed with the ground work before
any other work to prevent errors occurring due to static electricity and other
reasons.
After completing cable installation, unused ports must be capped.
When installing, take care not to overlap or tangle the cables. In addition, consider
future expansion. Install the DC power cable and data transmission cable away
from the AC power cable to prevent electromagnetic induction.
Ensure the work is done by personnel properly trained for the cabling job.
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Use a heat shrink tube at the connector connection for cables that are installed
outdoors, such as feeder lines, to prevent water leakage and corrosion from
occurring at the part exposed to the outside.
Connect each cable of the connector assembly in a straight line.
Be careful when connecting the cable so that contact failure does not occur at
the connector connection due to tension.
When installing the cable outdoor, use relief engraving and coated labels to
prevent the markings from being erased.
Since the form and attachment method for identification tags are different for
each provider, consult with the provider before attaching the tags.
Confidential
Chapter 3 Connecting Cables
34