Mechanical Installation; Unpacking; End Of Life Disposal; Cleaning - ABB Endura AZ series User Manual

Endura AZ series integral and remote transmitter
Combustion oxygen monitor

3 Mechanical Installation

3.1 Unpacking

Caution. Visually inspect equipment for damage before installing. Do not install damaged or faulty
equipment.

3.2 End of Life Disposal

The transmitter contains a small lithium battery that must be removed and disposed of responsibly in
accordance with local environmental regulations.
The remainder of the transmitter does not contain any substance that causes undue harm to the
environment and must be disposed of in accordance with the Directive on Waste Electrical and Electronic
Equipment (WEEE). It must not be disposed of in Municipal Waste Collection.

3.3 Cleaning

The transmitter can be hosed down if it has been installed to IP66 / NEMA 4 standards, (cable glands are
fitted correctly and all unused cable entry holes are blanked off – see Section 4.1.1, page 12 [remote
transmitter] or see Section 4.9, page 22 [integral transmitter]).
Warm water and a mild detergent can be used.
8
3 Mechanical Installation
IM/AZ20E–EN Rev. F