Single Point Of Entry; Using Webpro - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
S
S 4
INGLE
ECTION
When connected to the SV8100 using WebPro or PCPro you have the ability to
connect directly to the UM8000 Web Admin Console (WAC). The SV8100 knows if the
UM8000 is installed and running and also knows the IP address assigned to it. Other
than normal system programming for the UM8000, no configuration changes are
required.
The instructions below show how to connect to the UM8000 from PCPro or WebPro
after you have connected to the SV8100 system. The UM8000 must be connected to
the same LAN as the SV8100 CPU.
4.1
11 - 6
P E
OINT OF NTRY

Using WebPro

1. Log in to the SV8100 with user name = tech and password = 12345678.
Figure 11-1 WebPro Login
UM8000
Remote Maintenance