Composition Of Parts Which Contact The Human Body - Topcon Compu-Vision CV-5000 User Manual

(3) Forehead rest knob................. The position of the forehead rest can be adjusted by mov-
(4) Leveling knob.......................... Levels the measuring head.
(5) Near-point rod holder .............. The near-point rod is inserted and attached here.
(6) Clamp screw ........................... Retains the near-point rod.
(7) Forehead rest.......................... The patient's forehead rests here.
(8) Cornea alignment scale .......... Measures the corneal vertex position.
(9) Level ....................................... Indicates the horizontal position for the level adjustment.
(10) Face shield.............................. The patient's face rests here.This cover can be removed.
(11) Cornea illumination ................. Illuminates the anterior eye segment to check the PD easily
(12) Near-point illumination ............ Illuminates the near-point target.
(13) Tilt locking lever ...................... Adjusts the angle of the tilted measuring head and fixes it.
(14) Arm mounting shaft................. Mounts the instrument on the arm, etc.
(15) PD cover ................................. The cover for holding when tilting the head.

COMPOSITION OF PARTS WHICH CONTACT THE HUMAN BODY

Forehead rest : Polypropylene resin (Type B applied part)
Face shield : Polypropylene resin
ing this knob backward/ forward.
even during examination in a dark room.
19
1. BEFORE USE