Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Topcon DC-4
Summary of Contents for Topcon DC-4
- Page 1 USER MANUAL DIGITAL CAMERA UNIT DC-4...
-
Page 3: Introduction
® • TOPCON shall not bear any responsibility for any effect as a result of using capturing software and User Manual. • Clinical treatment actions shall be the responsibility of the doctor. TOPCON shall not bear any responsibility for the result of diagnosis. - Page 4 3. The contents of this manual are correct to the best of our knowledge. Please inform us of any ambiguous or erroneous descriptions, missing information, etc. 4. Original Instructions This instruction manual was originally written in English. ©2013 TOPCON CORPORATION ALL RIGHTS RESERVED...
-
Page 5: Table Of Contents
CONTENTS INTRODUCTION ......................... 1 INTENDED USE / INDICATIONS FOR USE ..............1 FEATURES ..........................1 PURPOSE OF THIS MANUAL ....................1 GENERAL SAFETY INFORMATION ..................4 GENERAL MAINTENANCE INFORMATION ..............5 DISCLAIMERS ..........................5 DISPLAYS AND SYMBOLS FOR SAFE USE .............. -
Page 6: General Safety Information
GENERAL SAFETY INFORMATION WARNINGS Preventing Electric Shocks and Fires To avoid electric shocks, do not open the cover. To avoid fires and electric shocks, do not install the instrument in a place where it may get water or a liquid. To avoid fires and electric shocks, do not place cups and liquid containers nearby. -
Page 7: General Maintenance Information
For details, follow the instructions. DISCLAIMERS •TOPCON is not responsible for damage due to fire, earthquakes, actions or inactions of third persons or other accidents, or damage due to negligence and misuse by the user and any use under unusual conditions. -
Page 8: Displays And Symbols For Safe Use
DISPLAYS AND SYMBOLS FOR SAFE USE To encourage safe and proper use and to prevent injury to the operator and others or potential damage to property, important messages are put on the instrument body and inserted in the instruction manual. We suggest that everyone understand the meaning of the following displays, icons and text before read- ing the "GENERAL SAFETY INFORMATION"... -
Page 9: Configuration
CONFIGURATION NAME OF PARTS IR selector lever MAIN BODY Arm cover Power / Interface cable CABLE UNIT LAN cable (optional accessory) If you use others except the LAN cable, which is the optional accessory, a NOTE communication trouble or improper contact occurs from time to time. Use the LAN cable, the optional accessory. -
Page 10: Standard Accessories
Make sure that all the following standard accessories are packed. Number in parentheses are the quantities included. User Manual (1) Arm cover (1) Rear sheal (1) Instruction Manual (1) INSTRUCTION MANUAL DIGITAL CAMERA UNIT INSTRUCTION MANUAL DIGITAL CAMERA UNIT DC-4 DC-3 Capturing software DVD (1) Hexagon wrench (1) CONFIGURATION... -
Page 11: Assembly Procedure
ASSEMBLY PROCEDURE Tools A 3mm crosshead screwdriver is required. WIRING CABLES • Turn off the power switch of slit lamp, before connecting the cables. CAUTION • To prevent short-circuiting, connect cables correctly. Using a crosshead screwdriver, remove the arm cover of the slit lamp. Turn the control lever of the slit lamp and bring the arm to the top. - Page 12 Pass the Power/Interface cable through the holes of base of the slit lamp. Connect the Power/ Interface cable to the base of slit lamp. Connect the LAN cable to the body. Fold the cable as follows. NOTES Do not pull the cables, as they may be damaged. ASSEMBLY PROCEDURE...
- Page 13 Connect the LAN cable to a personal computer. • DC-4 must be connected to a personal computer to perform equipment opera- tions and image controls. NOTES • To operate DC-4 and capture images with a P.C., capturing software needs to be installed. ASSEMBLY PROCEDURE...
-
Page 14: Mounting The Body
MOUNTING THE BODY When necessary, attach the adapter cover SO-AC6,SO-AC7(optional accessory). Screw down the body to the microscope mount. Insert the arm cover into the arm from underneath, taking care not to catch cables. Fasten screws. Unkink cables under the table. Move the base to the left end and lock. Fix cables under the table, allowing enough slack. -
Page 15: Operation Procedure
OPERATING THE IR SELECTOR LEVER DC-4 can take infrared light photographs in combination with the BACK- NOTE GROUND ILLUMINATION BG-5(optional accessory). When you take infrared photographs, tilt the IR firter selector lever to the right. -
Page 16: Maintenance
NOTE • If stains are persistent and cannot easily be removed, contact your dealer or TOPCON (see the back cover). When the cover become stained, clean them with a dry soft cloth. If the cover is badly stained, prepare a lukewarm solution of neutral detergent for dish, moisten the cloth and thoroughly wring it. -
Page 17: Troubleshooting
When a trouble is suspected, check the condition following the check list below. If remedies following the instructions cannot restore the normal condition, or if the problem does not fall on any of the conditions in the check list, contact your dealer or TOPCON (see the back cover). Check List... -
Page 18: Specifications And Performance
SPECIFICATIONS AND PERFORMANCE SPECIFICATIONS AND PERFORMANCE For product improvements, the specification and design are subject to changes without prior notice. BASIC SPECIFICATION System Beam flux division by beam splitter Beam splitter division ratio Operator side: 50%; Camera side: 50% Focus distance 35.7mm Image pickup device 1/2.5 type CMOS;... -
Page 19: Specifications Of Personal Computer (Commercial Product) To Be Connected
SPECIFICATIONS OF PERSONAL COMPUTER (COMMERCIAL PRODUCT) TO BE CONNECTED Platform Compatible (DOS/V) machine for IBM/PC AT Computer The computer where Microsoft Windows 7 Professional can operate Microsoft Windows 7 Professional 32bit (Japanese/English) Microsoft Windows 7 Professional 64bit (Japanese/English) Intel Core i3-2100 3.10GHz or higher speed CPU Memory 4GB or more Monitor... -
Page 20: General Information On Usage And Maintenance
To keep the eye open. To understand and follow instructions when undergoing an examination. INTENDED USER PROFILE The DIGITAL CAMERA DC-4 is an electric instrument for medical use. Use this instrument under a doctor's guidance. ENVIRONMENTAL CONDITIONS FOR USE Temperature : 10°C to 40°C... -
Page 21: Environmental Conditions For Packaging In Storage
DC-4 does not have any part against electric shocks. • Degree of protection against harmful ingress of water: IPx0 DC-4 has no protection against ingress of water. (The degree of protection against harmful ingress of water defined in IEC 60529 is IPx0) •... -
Page 22: Disposal
DISPOSAL When disposing the instrument, either ask a professional waster disposer, or contact your dealer or TOPCON (see the back cover). This symbol is applicable for EU member countries only. To avoid potential damage to the environment and possibly human... - Page 23 • Period of use: Please inform us of the date of purchase. • Defective condition: Please provide us with as much detail as possible on the problem. DIGITAL CAMERA UNIT DC-4 USER MANUAL The 2013 version (2013.08-100TH Date of issue: August 19, 2013 Published by TOPCON CORPORATION 75-1 Hasunuma-cho, Itabashi-ku, Tokyo, 174-8580 Japan.
- Page 24 DIGITAL CAMERA UNIT DC-4 44797 92030 Printed in Japan 1306-100TH...
Need help?
Do you have a question about the DC-4 and is the answer not in the manual?
Questions and answers