IAI EC-RR6*AH series Instruction Manual page 229

2
Touch the [Pressing force] and [Press starting point] buttons.
Action
Ten Key window will open.
3
After setting the numerical value, touch the [ENT] key.
Action
The screen will switch to the Simple Data Setting window.
4
Touch the [Transfer] key.
Action
The numerical values will
be written to the controller.
The [BEnd] button and
[FEnd] button will
turn green.
5
Press the [FEnd] or [BEnd] buttons to operate.
Check the results of the new setting/adjustment.
4.3 Setting/adjustment of operating conditions (AVD)
4-10