Fibre Channel Adapter Port Leds - HP 3PAR StoreServ 7000 Troubleshooting Manual

Figure 18 Interconnect port LEDs
Table 1 1 Interconnect port LEDs
Callout
1
2

Fibre Channel Adapter Port LEDs

The Fibre Channel adapter in the controller node includes Fibre Channel port LEDs:
Figure 19 Fibre Channel 4–port LEDs
Table 12 Fibre Channel adapter port LEDs
Callout
1
18 Understanding LED Indicator Status
LED Appearance
Status Green
Fault Amber
LED Appearance
All ports No light
Port speed Amber
Indicates
On – Link established
Off – Link not yet established
On – Failed to establish link connection
Off – No errors currently on link
Flashing – Cluster link cabling error, controller node in wrong slot,
or serial number mismatch between controller nodes.
Indicates
Off – Wake up failure (dead device) or power is not
applied
Off – Not connected
3 fast blinks – Connected at 4 GB/sec.