Setting item
Event/Condition Type Common Settings
Event/Condition Type Individual Settings
*1 When the data type of the monitoring target is "Bit", "[INT]1" in the comparison target indicates 'ON'.
8 OPERATION EXAMPLE
94
8.5 MES Interface Function Setting
Event/Condition Type
Detail Type
Monitoring Target
(Data Type)
Condition
Comparison Target
(Data Type)
2.
Set each setting item according to the following table
and click the [OK] button.
"[INT]1" in the "Comparison Target" can be
set on the "Integer Type Constant Settings"
screen.
"Comparison Target" "Constant"
"[Integer]"
Setting content
Condition (Value Monitoring)
[TAG]GettingData.ReportingTrigger
Bit
=
*1
[INT]1
3.
Click the [Next] button.