8.5
MES Interface Function Setting
Data (SQL statement) communication can be performed without creating a program by setting the parameters of MES
Interface Function Configuration Tool.
Parameter setting procedure
Starting MES Interface Function Configuration Tool
Setting a network
Setting a target device
1.
Start MES Interface Function Configuration Tool.
Select [Start] [All Programs] [MELSOFT]
[MESInterface] [MELSEC iQ-R Series MES
Interface Function Configuration Tool] from Windows
Start.
1.
Set a network of MES interface module.
Select "Network Settings" in the edit item tree.
This setting is used as a default.
1.
Set a connection route to a target device.
Select "Target Device Settings" in the edit item tree.
This setting is used as a default.
8.5 MES Interface Function Setting
8 OPERATION EXAMPLE
8
81