Starting An Mes Interface Module And An Configuration Personal Computer - Mitsubishi Electric RD81MES96 User Manual

4.2
Starting an MES Interface Module and an
Configuration Personal Computer
Start a server before starting MES interface module and a configuration personal computer.
MES interface module
Mount it on a base
Switch the dot matrix LED display mode switch
to the right (SHOW)
Turn the power of the system ON
The ERR LED is flashing since an SD memory card is not inserted
Insert an SD memory card
Turn the power of the system OFF
Turn the power of the system ON
4 PROCEDURE BEFORE OPERATION
48

4.2 Starting an MES Interface Module and an Configuration Personal Computer

*1
*2
Connect MES interface module and the configuration personal computer on a 1:1 basis.
*5
Connect MES interface module and the configuration personal computer
to a network according to the network setting
Configuration personal computer
Install MES Interface Function Configuration Tool
Start MES Interface Function Configuration Tool
Set the network of MES interface module
Specify the IP address and account of MES interface module to a
Format the SD memory card with MES Interface Function Configuration
Set the settings for MES interface module
Change the connection destination specification according to the
network setting of MES interface module
Write the setting to MES interface module
Necessary
Check the operation result
Operation starts
MX MESInterface-R
*4
connection destination *6
Tool as necessary
Write the setting to MES
interface module
MES Interface Function
Configuration Tool
and reflect the setting
and review the setting
Not necessary
*3
*7