■Setting to associate the extension (.mu2) of project file and program
When the [No] button is selected on the screen above, MES Interface Function Configuration Tool does not open by double-
clicking the project file with the extension (.mu2). Perform the following operation to open the project file.
Operating procedure
Select [Project] [Open] on the menu in MES Interface Function Configuration Tool
In another way, refer to the online help of the operating system and associate with a program.
Environment after installation
Each piece of software is installed to a specified folder and registered in the start menu.
The following table shows the startup method and the maximum number of software, which can start at the same time, for
each piece of software after installing.
Software
MES Interface Function Configuration Tool
DB Connection Service Setting Tool (64-bit)
DB Connection Service Setting Tool (32-bit)
Project File Conversion Tool
*1 Select [All apps] on the Start screen or [Start] [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
*3 For 64-bit version operating system, it is installed in the following folder:
C:\Program Files(x86)\MELSOFT\RMESIF
7.2
Uninstallation Procedure
Uninstall from the control panel in Windows.
Project File Conversion Tool is automatically uninstalled when MES Interface Function Configuration Tool is uninstalled.
Disable the Windows firewall if it has been set manually.
For the method to disable the Windows firewall, refer to the manuals and online help of the operating system and the security
software used.
Environment after uninstallation
The installed program files, folders, and start menu are deleted after uninstallation.
If a file, which is output after installation such as DB access log, exists in a folder, the file/folder will not be deleted.
Startup method
*2
Click [MELSOFT] [MESInterface]
*1
Start
.
Click 'RMESIFCONV\MUPtoMU2.exe' under the execution file storage destination
of the MES Interface Function Configuration Tool.
[(each piece of software)] from Windows
7 INSTALLATION AND UNINSTALLATION
7.2 Uninstallation Procedure
Maximum
No.
5
7
1
1
*3
No limit
73