Main Screen Basic Operations; A Switching The Display Mode Of The Screen - Sanyo DSR-2108 Instruction Manual

Main screen basic operations

A
Switching the display mode of the screen
Allows you to select the display mode for live and playback
video.
b Single-screen display
Click the channel selection button on the operation panel or
select one screen and double-click.
The video of the specified camera is displayed in
single-screen.
Memo: Double-clicking on a single-screen display returns the
previous screen display.
b Quad-screen display
Click the quad-screen display button on the operation panel.
The video of the cameras connected to this unit is displayed
on quad-screen.
Memo: Each time the button is clicked the video of the next
four channels is displayed in order of the channel
numbers.
01 02
03 04
13 14
15 16
☞
In DSR-2108, the unit of 4 screens, 1 to 4 and 5 to 8,
are displayed in sequence.
55
b Multi-screen display
Click the multi-screen display on the operation panel.
The video of the cameras connected to this unit is displayed
on multi-16 screen or multi-9 screen.
☞
Memo: Each time the button is clicked the display switches in
05 06
07 08
Memo: <About selecting a camera video>
09 10
11 12
In DSR-2108, the only available multi-screen is multi-8
screen.
turn from the multi-16 screen to the multi-9 screen (2
patterns) video.
01 02
05 06
09 10
13 14
01 01 02 02
04 04
05 05
07 07 08 08
10 11
13
14
16 01
If a live video is selected (clicked) on the quad-screen
or multi-screen display, a red frame appears around
the live video to indicate that it is selected.
It is necessary to select a camera to perform the
following operation in quad-screen or multi-screen.
• Saving images (P57)
• PTZ dome camera operations (P58)
• Switching the audio output (
03 04
07 08
11 12 12
16
15
03 03
06 06
09 09
12
15
02
5
Audio controller: P54)