Function Of The Operation Panel - Sanyo DSR-2108 Instruction Manual

Main screen structure and function of each part

Function of the operation panel

<16 channels>
1
2
8
9
G
: The display of the icon changes according
SW
to the selection made.
1 Scrolling connected sites (Select Site)
To change the connection destination select
the site name of the connection destination
using the pull down menu.
(Normally the site name of the present
connection destination is displayed.)
2 Connect/Disconnect button
: Displays the [Connect] dialog for
connection (P52)
SW
: Disconnects the connection
3 Screen display switch button (P55)
: Switching to quad-screen display
: Changing the display to a multi screen (multi-16 screen/ multi-9 screen)
: To sequence (automatic camera switch) display
-
: Selecting a channel and switching to single-screen
display
☞
In DSR-2108, only multi-8 screen is available since the number of
3
available channels is 8.
4 Camera controller (Only for PTZ dome camera)
When clicking the controller button (
changes. (P58)
SW
4
5 Audio controller
Adjusts the audio output of live video and playback video.
5
: The audio is not output
SW
6
: The audio is output
VOLUME : Adjusts the output volume
6 [SEARCH] button
Switches the main screen to search mode (P59)
7
7 [CAPTURE] button
Saving images (P57)
8 Recording button (P56)
F
: Sets recording function to ON (Recording to PC hard disk)
SW
: Sets recording function to OFF
H
9 Still button (P57)
: Freezes the live video on PC
SW
: Unfreezes the live video on PC
F Alarm output switch button
: Switches the alarm output (ALARM OUT 1) on the back panel
to ON/OFF (A The red button light up when an alarm output is
in progress)
G Menu button
: Displays the set up menu screen (P62)
H Exit button
: Exits the software and closes the screen
/ ), the controller display
: For Pan/Tilt operations
: For Zoom/Focus operations
54