Network Settings; A Setting The Port; B Setting A Client Access; C Setting The Bandwidth Saving - Sanyo DSR-2108 Instruction Manual

NETWORK settings

Press the MENU button and input the password.
The MAIN MENU is displayed, select "NETWORK" using the
control button ({|}~).
MAIN MENU
LIVE
NETWORK HDD SET
NETWORK
PORT
CLIENT ACCESS
BANDWIDTH SAVING
NETWORK TYPE
IP
SUBNET MASK
GATEWAY
DNS
DDNS
SEND E-MAIL
NTP SET
RECORD SYSTEM
SERVICE
5445
ON
ON
LAN
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
OFF
OFF
OFF
A
Setting the PORT
When connecting this unit to a multiple unit network, set an
individual port number.
1
Select "PORT" using the control button ({|) and
press the ENTER button.
The "PORT" screen is displayed. The initial value is
5445.
5 4 4 5
- - - - -
2
Select a value using the control button ({|), and
select a port number by repeating the operation
using the control button (}~).
3
Press the EXIT/STOP button once operations are
complete.
B
Setting a CLIENT ACCESS
To give permission to operate from an external PC.
Select "CLIENT ACCESS" using the control button ({|),
and set "ON" using the control button (}~).
ON: Accessing the unit via a PC using the supplied
exclusive software
OFF: Does not allow access
C
Setting the BANDWIDTH SAVING
Set if the network bandwidth is not large enough when
monitoring live videos.
Select "BANDWIDTH SAVING" using the control button
({|), and set the settings using the control button
(}~).
ON: Live videos advance frame by frame (At the rate of
1 frame per second)
OFF: Does not limit the network bandwidth
PORT
42