Fujitsu ETERNUS DX60 S3 User Manual page 48

Chapter 2 System Status
2.3 Remote Support
• Automatic Firmware Upgrade
Whether the automatic firmware upgrade is enabled or disabled is displayed. This item is not displayed in
a Unified Storage environment.
- "-" (hyphen)
The Remote Support is not operating.
- Enable Download schedule
The automatic firmware upgrade is enabled. Receive controller firmware according to the download
schedule.
- Disable
The automatic firmware upgrade is disabled.
• Automatic Firmware upgrade (with activation on next power cycle)
Whether or not to execute the controller firmware application, after controller firmware download has
been completed, is displayed. This item is not displayed in a Unified Storage environment.
- "-" (hyphen)
The Remote Support is not operating.
- Enable
Execute the controller firmware application after controller firmware download is complete. The
downloaded controller firmware will be changed to the controller firmware which will be enabled at the
next startup.
- Disable
Do not execute the controller firmware application after controller firmware download is complete.
• Automatic Log Transmission
Whether the automatic log transmission is enabled or disabled when an error occurs is displayed.
- "-" (hyphen)
The Remote Support is not operating.
- Enable
The automatic log transmission is enabled. The internal log of the ETERNUS DX/AF is automatically sent
to the REMCS center when an error occurs.
- Disable
The automatic log transmission is disabled.
• Periodic Log Transmission
Whether the periodical log transmission is enabled or disabled is displayed.
- "-" (hyphen)
The Remote Support is not operating.
- Enable Transmission schedule
The periodical log transmission is enabled. The internal log of the ETERNUS DX/AF is automatically sent
to the REMCS center according to the transmission schedule.
- Disable
The periodical log transmission is disabled.
48
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0