Fujitsu ETERNUS DX60 S3 User Manual page 124

Chapter 3 Component Status
3.6 Controller Enclosure Detail
■ Rear View
The image that is displayed in this screen varies depending on the storage system model.
●
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F
The following items are displayed in the Main area:
- Storage system image
The rear view of the CE that is installed in the ETERNUS DX/AF is displayed.
The CM status and the Power Supply Unit (PSU) status are displayed with icons.
By clicking the CM number, the [Controller Module] screen is displayed. Refer to
Detail" (page 127)
By clicking the PSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to
"3.10 PSU/CPSU (CE) Detail" (page 140)
- Parts
The CM number and the PSU number is displayed.
By clicking the CM number, the [Controller Module] screen is displayed. Refer to
Detail" (page 127)
By clicking the PSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to
"3.10 PSU/CPSU (CE) Detail" (page 140)
- Status
The status of each component is displayed. Refer to
for display items.
for display items.
for display items.
for display items.
124
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"A.5 Component Status" (page 410)
"3.7 Controller Module
"3.7 Controller Module
for details.
P2X0-1260-19ENZ0