Thin Provisioning Pool Status - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Status List
A.4 Thin Provisioning Pool Status
A.4

Thin Provisioning Pool Status

Thin Provisioning Pool (TPP) status is displayed with an icon and the status name. The TPP status is described
below.
Status
Available
Maintenance
Readying
Partially Readying
Exposed
Blockade
Broken
Data Lost
Unknown
The TPP is operating normally.
Forcible recovery of the TPP is being performed.
All the physical allocation area in the TPP is not formatted.
Some parts of the physical allocation area in the TPP is not formatted.
The TPP is available.
The "Exposed" state of the TPP is displayed not only when the RAID group that
configures the TPP has lost redundancy and is in the "Exposed" state, but also when
the RAID group maintains redundancy in the "Spare in Use" state. The "Exposed"
state of TPP indicates that the RAID group in the TPP is not in the normal state
because of any causes such as the drive failure.
The TPP is blocked.
The TPP is broken.
Data in the TPP is lost. Reading or writing of data cannot be performed.
A status other than the ones listed above.
409
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0