Gas Pressure Trigger Application; Circuit Breaker Condition Monitoring Main Application; Spring Charge Main Application; Gas Pressure Main Application - ABB COM600 series User's & Technical Manual

5.1 substation analytics

Hide thumbs Also See for COM600 series:

Table of Contents

3.3.4.

3.3.5.

3.3.6.

3.3.7.

3.3.8.

COM600 series 5.1

Substation Analytics Technical Manual

Periodic triggering is used to ensure the accuracy of charge time calculation.

Gas Pressure Trigger Application

Gas pressure trigger application listens to data changes of trigger data points coming

from the IED. Trigger condition are based on status changes of the gas pressure signal.

This will then trigger the execution of gas pressure main application.

The circuit breaker condition monitoring main application calculates circuit breaker

condition monitoring data according to the inputs from the IED. Without comtrade data

for the triggering time it will produce circuit breaker trip time, circuit breaker inactivity

and operations count calculations. If comtrade data is available it will additionally produce

circuit breaker accumulated energy data and circuit breaker trip time calculation is pro-

duced with better accuracy.

Spring charge main application calculates the spring charge time and activates alarm out

according to input and setting values.

Gas pressure main application activates alarm out according to input and setting values.

The IEC 61850 main application contains mappings to the OffSide OPC server. This is

a crucial part of piping the results onwards from the analytics. The application is run

whenever any of the main applications are reporting new results.

1MRS758734

Table of Contents