Wood Pole And Wall Mounting; Figure 3 Wood Pole And Wall Mounting; Table 4 Wood Pole And Wall Mounting Callouts - ABB MicrOS 410 Installation Manual

Wood Pole and Wall Mounting

For wood pole and wall mounting, the antenna radome must be clear of obstruction.
Figure 3
Table 4
Item
1
2
3
Mount the MicrOS 410 on a wood pole or wall
1. Select a mounting location. You can attach the MicrOS 410 to any outdoor wood pole of
diameter at least 1 inch.
2. Attach the pole bracket to the pole by threading a 1/4-inch lag bolt through the hole in the
clamp slot to the pole. Make sure that the bracket is level. Alternatively, a hole can be drilled
through the pole and a 1/4-inch bolt of sufficient length can be used with a washer and nut.
3. Attach the MicrOS 410 with mounting bracket to the pole bracket as shown in the figure.
Make sure the unit is level.
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
MicrOS 410 Installation Guide
Wood Pole and Wall Mounting
Wood Pole and Wall Mounting Callouts
Description
Anchor screws (4 pieces)
Plastic anchor (4 pieces)
Wall
of the pole bracket.
the middle of the pole bracket just above the clamp slot.
Chapter 2
20