Product Summary; Preparing For Installation; Table 1 Micros 410 Models - ABB MicrOS 410 Installation Manual

Product Summary

The MicrOS 410 has the following characteristics:
802.11b/g/n band, 2400-2483 MHz
Support for 10/100Base-T Ethernet clients
Support for RS-232 and RS-485 serial clients
PoE power input 7-36 VDC
Table 1
Table 1
Model
M4101060
M4101000
M4101062
M4101002

Preparing for Installation

The MicrOS 410 must be installed by a trained professional, value added reseller, or systems
integrator who is familiar with RF planning issues and regulatory limits defined by the
governing body of the country in which the unit will be installed. This section explains how to
prepare the installation site.
An exploded view of the MicrOS 410 assembly is shown in
Note
Operating the unit with non-qualified antennas is a violation of U.S. FCC Rules Part 15.203(c), Code of
Federal Regulations, Title 47.
MicrOS 410 Installation Guide
lists the MicrOS 410 models.
MicrOS 410 Models
Description
MicrOS 410 Bridge, one Ethernet port plus one serial port (FCC/IC)
MicrOS 410 Bridge, two Ethernet ports (FCC/IC)
MicrOS 410 Bridge, one Ethernet port plus one serial port (ETSI)
MicrOS 410 Bridge, two Ethernet ports (ETSI)
Figure 1.
Chapter 2
12