Magne 4 Ossd-Info - ABB Magne 3 Series User Instructions

Magne 4 OSSD-Info

The info outputs are non-failsafe and must therefore never be used to control a safety application.
Warning
The safe dynamic or OSSD signals from the interlocking device Eden is used to control the safety
application.
Important! Shielded cable is necessary between the unit and the rest of the safety loop.
Important! Several Magne OSSD-info can be locked with the aid of M12-3G.
2TLC172315M0201, rev. K
Monday, May 07, 2018 10:51:13 AM
M12 8 pole male
connector seen from
the cable side.
M12 8-pole connector:
1 ) White: OSSD1 out
2 ) Brown: +24 VDC
3 ) Green: OSSD1 in
4 ) Yellow: OSSD2 in
5 ) Gray: Info output (Eden + Locked)
6 ) Pink: OSSD2 out
7 ) Blue: 0 V
8 ) Red: Locking signal +24 VDC
9
M12 8 pole female
connector seen from
the cable side.
www.abb.com/jokabsafety