Magne 4 Dyn-Info - ABB Magne 3 Series User Instructions

Magne 4 DYN-Info

The info output is non-failsafe and must therefore never be used to control a safety application.
Warning
The safe dynamic or OSSD signals from the interlocking device Eden is used to control the safety
application.
Important!
Shielded cable is necessary between the unit and the rest of the safety loop.
2TLC172315M0201, rev K
Monday, May 07, 2018 10:51:13 AM
M12 8 pole male
connector seen from
the cable side.
M12 8-pole connector:
1 ) White: Dynamic signal in
2 ) Brown: +24 VDC
3 ) Green: Locking signal +24 VDC
4 ) Yellow: 0 V
5 ) Gray: Info output (Eden + Locked)
6 ) Pink: Dynamic signal out
7 ) Blue: 0 V
8 ) Red: Not used
8
M12 8 pole female
connector seen from
the cable side.
www.abb.com/jokabsafety