Samsung Version 2.1 User Manual page 33

Message Monitoring
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
completed, the following state message pane appears on the screen.
The connection state of Link is indicated as
picture【
currently connected state is normal. The static AVI picture means that the connection has
stopped running or there is an error. At this time, the [CONNECT] button of Link
【
Note
If there is an error in the connection between Link and PBX system, error
information is displayed on the message pane. Information of each state displayed
on the state message pane has its icon respectively.
The General Message Icon means that the Link notifies a user of general message,
and the Error Message Icon means that the Link notifies a user of error message
generated while the Link runs.
If an error occurs during the connection process, the Link performs an automatic recovery
process until the error disappears (or up to the internally limited time). If the Link cannot
perform the automatic recovery, it notifies users of the error through the status message
pane.
© SAMSUNG Electronics Co., Ltd.
Figure 4.3 Connection success message
】 rotates in the bottom right corner of the window. This means the
】changes into
GeneralMessage.ico ErrorMessage.ico
Figure 4.4 Automatic recovery message after error event
OfficeServ Link Version 2.1 User Guide
】.
, and the AVI
Page 33