Communication Environment Setup For User Connection In Standby - Samsung Version 2.1 User Manual

Samsung officeserv link user guide
Hide thumbs Also See for Version 2.1:
Table of Contents

Advertisement

OfficeServ Link Version 2.1 User Guide
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Communication Environment Setup for user connection in standby

As soon as connections have been successfully completed with the telephone system, the
Link starts a process in order to perform the service needed to receive requests from users.
In the LAN-based TCP/IP case this listening port is set to 6000 by default. Usually this will
not need to be changed, but port numbers 1024 or higher can be used if necessary.
Values of 0 ~ 1023 have been already built in the Link.
A port currently being used for another service by the computer cannot be specified. There is
a command for you to check which TCP/IP port numbers are currently used. Use the
command at the command prompt of Windows as follows:
c:\>Netstat -a -e -n -p TCP
Note
The setting of communication environment can be done only in the offline status between Link
and telephone system. Online state (Disabled) does not allow you to activate this function button.
Page 22
Figure 3.5 Status View of Ports in Use
Link Settings
© SAMSUNG Electronics Co., Ltd

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents