Names and Function
Familiarize yourself with the names and function of each part on the front and back panels, before
installing SNS-110.
Front View of SNS-110
Name
Receives input from maximum of 4 video image signals.
Video In
Transmit the image output to cameras or other external video-imaging devices
Video Out
(Loop Through Out)
Off : when using as console purpose with RS-232C port connected to a PC
Control S/W
On : when RS-232C is to be connected to an External Modem.
Off : use the RS-485 on the reverse side as Half Duplex
F H (S/W)
On : use the RS-485 on the reverse side as Full Duplex TX mode
Off : Tx Termination resistance 120 Ω off
Tx R (S/W)
On : Tx Termination resistance 120 Ω on
Off : Rx Termination resistance 120 Ω off
Rx R (S/W)
On : Rx Termination resistance 120 Ω on
Network LED
Blinks when sending or receiving data with the proper connection.
Power LED
Indicates the power on/off.
Preset Button
Returns to the initial set-up environment of factory default
Reset Button
Restarts SNS-110 without turning off the power.
1
2
When connected, the terminal resistance of 75Ω is automatically seized.
The current version does not support connecting an External Modem.
8
5 6
3
4
3 4
1.CONTROL 2.F/H 3.Tx R 4.Rx R
7
8
Function
9
10