Setting Other Network Information; Changing Ip Address - Samsung Version 1.1 Owner's Manual

Setting Other Network Information

After successfully setting up the IP address in Ethernet, follow the next procedure to set up additional
network information.
After the previous procedure, you must set up the following information, confirmed by the network
manager, to connect to network successfully.
Gateway
Subnet Mask
Domain Name
DNS
(1) Open a web browser (Netscape or Explorer) from the network-connected PC or Unix machine with
SNS-110 installed.
(2) Log-in with the SNS-110 IP address set up through the web browser. You must enter the exact ID and
password.
The initial user name and password are shown below.
User Name : root
Password : w2000
(3) After logged in, set up the additional network information in administration mode.
(4) Be sure to reset or switch off and then switch on your SNS-110 after setting.
Note
Please, refer to Chapter 5 and 7 for Log-in and administration mode network
setting up.

Changing IP Address

(1) To change the present IP address, log in with the present IP address. Then, change the IP address
in network set-up of administration mode.
Refer to Chapter 7. setting Administration Mode Network.
(2) Refer to APPENDIX B "Factory Default", to set up the factory default and set up a new IP address
according to Chapter 4, Setting an IP Address.
32