Setting with IP Installer
The 'IP Installer' is an application program that supports easy setting of network parameters of SNS-110 such
as IP Address, Gateway, Subnet Mask and so on. Before executing the 'IP Installer', the SNS-110 should be
connected with PC through RS-232C cable. The 'IP Installer' works on Windows 95/98/ME/NT/2000/XP.
Program Name of IP Installer : SetupWebTX_v11.exe
Note
You can download the 'SetupWebTX_v11.exe' at 'http://www.samsungelectronics.com'.
(1) Download the 'SetupWebTX_v11.exe' and install your PC.
(2) Connect SNS-110 with PC through RS-232C cable. Please refer to the 'Connecting to RS-232C' of
Chapter 3.
Caution
Please identify which serial port is assigned for the connection of SNS-110 among
COM1/COM2 of PC.
When connecting the SNS-110 with PC, use the RS-232C cable included in the package of
SNS-110.
You have to confirm the assigned serial port not to be used simultaneously by other devices
such as modem or mouse.
(3) When executing the 'IP Installer' after the installation, you will see the following window. Select the serial
port what you assigned for the connection of SNS-110, and then click the "OK" button.
28