Samsung Version 1.1 Owner's Manual page 69

Codec initialized, register updated.
Create/Start working tasks... (f_CompVideo())
JCPY task start (id=1638400)
AlarmCheck task start (id=1703936)
Mailing task start (id=1769472)
PTZ control task start (id=1835008)
Create FTPClientTask.. Enter the loop.
Create PreAlarmTask.
All Task started.
Wait until jpeg task ready...
Launch Webcontrol server as new thread.
WebServer task created. now starting..
>Relay Status : 0
wt_cookie initialized.
SetCrsz 0x1111 : 01 01 01 01
using Cam Size/CR Info from FLASH 0x1111
WT_PSWD : cookie->user_count=2
WT_PSWD_AddEntry: NEW <uid=root, pswd='w2000', mem=0x76063c>
WT_PSWD_AddEntry: NEW <uid=guest1, pswd='guest1', mem=0x76053c>
WT_PTZ: PTZ driver [0x4e] 'None'
dummy ptz dirver inited.
user cmd: 'ptz' registered.
ftp server addr invalid.
End of WT_FTP_INIT
All modules initialized.
****************************************************************
* Internet Video Server : webTX SNS-110
* -System Version sns110.1.1 (Build 01.10.16.13.55) *
* -WebServer Version 3.1
* -OCX Version 1.0.1.6
****************************************************************
MAIL: Mailing Loop enter..
Alarm-port checking Task started.
Alarm check period : 100 ms, current alarm IO: 0x000080e0
ftp server addr invalid.
End of WT_FTP_INIT
PTZ control task started.
>Log In :
(2) When you correctly enter user name "root" and password, the following message will appear.
>Log In : root
>Password :
>Welcome to SAMSUNG webTX SNS-110
SNS-110>
*
*
*
69
Indicates the software version
loaded on SNS-110