Samsung Version 1.1 Owner's Manual page 56

(5) Between
Specifies the starting and finishing time of image file transfer. It only applies to files
which were set as "Every" or "Both" at (2). You can set "Time"(0~23), "Minute"(0~59),
or "Second"(0~59). If starting and finishing time are identical, image files are
transferred all day.
(6) Day
Specifies days to transfer image files. It only applies to files which were set as "Every"
or "Both" at (2). You can choose the days for "Every" mode transfer. If "Everyday" is
checked, all the values under "Everyday" is ignored.
(7) Filename
Specifies file names. It only applies to file which were set as "Every" or "Both" at (2). If
you chose "Overwrite mode," files are overlapped to the specified names. If you
choose "Save mode," transferred files are being saved in each "Camera", "Date",
"Time" Directory. For example, at Network Setting, if you specify a directory as
WebTxImage to save FTP server to send an image file at Camera 1, at every 10
seconds, the file is saved as the following file format.
~/WebTxImage/ch1/20001101/10/105940.jpg
~/WebTxImage/ch1/20001101/10/105950.jpg
~/WebTxImage/ch1/20001101/11/111000.jpg
....
Click "Save" to transfer after specifying all the correct values.
Caution
If Alarm is raised while the image files by "Once" or "Every" mode are
being transferred through the FTP server, the transfer by "Once" or
"Every" mode is standby until the Alarm Image Transfer is done.
The image is continuously transferred after the Alarm Image Transfer is
completed.
56