Restoring Factory Settings - Huawei SUN2000 User Manual

SUN2000 (8KTL-28KTL)
User Manual

7.2.13 Restoring Factory Settings

This topic describes how to restore factory settings for the SUN2000 on the monitoring panel.
After restoring factory settings is complete, all parameters except the current date and time
will restore the default factory settings. However, the operating information, alarm records,
and system logs do not change.
Context


Procedure

LCD
Issue 07 (2014-07-30)
Perform this operation with caution because all parameters except the current date and
time will restore to factory settings!
To ground PV arrays, install a three-phase four-wire isolation transformer and the
parameter of Isolation is set to Input Grounded, With TF.
The following table describes the procedure for restoring factory settings. The parameter
values in the figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default page, press
main menu.
2. Choose and press
7 LCD
to enter the
.
99