SUN2000 (8KTL-28KTL)
User Manual
Figure 5-27 Waterproof RJ45 connector composition
1. Plug
4. Seals
When routing communications cables, ensure that communications cables are separated from
power cables and away from interference sources to prevent communication interruptions.
Procedure
Step 1 Remove the insulation layer of an appropriate length from the shielded network cable using a
wire stripper.
Step 2 Insert the shielded network cable into the sealing nut, seals, screw nut, and housing.
Step 3 Connect the stripped network cable to corresponding pins on the plug, as shown in
5-28.
Issue 07 (2014-07-30)
2. Housing
5. Sealing nut
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
3. Screw nut
Figure
60