Setting Communications Parameters - Huawei SUN2000 User Manual

SUN2000 (8KTL-28KTL)
User Manual
LCD
----End

7.2.8 Setting Communications Parameters

This topic describes how to set RS485 communications parameters, including the address,
protocol, baud rate, and check mode.
Procedure

Issue 07 (2014-07-30)
The following table describes the procedure for setting communications parameters. The
parameter values in the figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
6. Enter a new password and press
Increase or decrease the value by pressing
or . Switch between data bits by pressing
.
7. Enter the new password again and press
.
NOTE
Ensure that the confirm password is the same as the
new password. otherwise, an error message will be
displayed.
After password changing is complete, the
LCD displays a message, displaying that the
operation is successful.
7 LCD
.
89