Double Point Status (Dps) - ABB COM600 series User Manual

3.4.5.10.
32
COM600 series, Version 5.1
Modbus Serial Slave (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
Common Data DPC
Class
Addresses
Control Address 0...65535
Default: 0
Indication Address 0...65535
Default: 0
Common
Update Rate 0...60000
Default: 0
Data Specific
Received as Inverse True
Control Value
False
Default: False
Send as Inverse True
Value
False
Default: False
Send as Single True
Point
False
Default: False

Double point status (DPS)

Table 3.4.5.10-1 Configurable DPS properties
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data DPS
Class
Addresses
Indication 0...65535
Default: 0
Description
Common data class according to IEC
61850.
Address for Control command.
Address for Indication.
Maximum update rate of indication
changes between the OPC server and the
client in milliseconds. The value 0 means
that the server sends all the changes to
the client.
Specifies if a control value is received as
an inverse value.
Specifies if a value of an indication signal
is sent as an inverse value.
Specifies if a value of an indication signal
is sent as a single point value.
Description
Common data class according to IEC
61850.
Indication address.
1MRS756913