Chapter 8 Technical Standards; General Technical Specifications; Um Interface; Abis Interface - Huawei Airbridge BTS3606A Technical Manual

Technical Manual
Airbridge BTS3606A CDMA Base Station

Chapter 8 Technical Standards

8.1 General Technical Specifications

The BTS3606A is compliance with the following general technical specifications:
TIA/EIA-97-D: Recommended Minimum Performance Standards for Base
l
Stations Supporting Dual-mode Spread Spectrum Mobile Stations.
Federal IMT-MC (CDMA 2000) Cellular Mobile System Operating in Band 450
l
MHZ.
C.S0032-0V1.0 Recommended Minimum Performance Standards for CDMA2000
l
High Rate Packet Data Access Network
C.S0039-0V1.0 Enhanced Subscriber Privacy for CDMA2000 High Rate Packet
l
Data
C.S0038-0V1.0 Signaling Conformance Specification for High Rate Packet Data
l
Air Interface

8.2 Um Interface

The BTS3606A is compliance with the following Um interface specifications:
I. Physical layer
TIA/EIA IS -2000-2-A: Physical Layer Standard for CDMA 1X Standards for Spread
Spectrum Systems.
C.S0024-0V4.0 CDMA2000 High Rate Packet Data Air Interface Specifications
II. MAC layer
TIA/EIA IS -2000-3-A: Medium Access Control (MAC) Standard for CDMA 1X
Standards for Spread Spectrum Systems.
III. Service capability
TSB2000: Capabilities Requirements Mapping for CDMA 1X Standards.

8.3 Abis Interface

The BTS3606A is compliance with the following Abis interface specifications:
I. Physical layer
E1 interface:
l
E1 Physical Interface Specification, September 1996
SDH STM-1
l
Chapter 8 Technical Standards
8-1
System Description