Safety; Emc - Huawei Airbridge BTS3606A Technical Manual

Technical Manual
Airbridge BTS3606A CDMA Base Station
ITU -T
l
Telecommunication Building.
ETS 300 253(1995) Equipment Engineering; Earthing and bonding of
l
telecommunication equipment in telecommunication centres.

8.5 Safety

The BTS3606A is compliance with the following safety requirements:
GB4943-2000: Safety of information technology equipment.
l
IEC60950 Safety of information technology equipment including Electrical
l
Business Equipment.
IEC60215 Safety requirement for radio transmitting equipment.
l
CAN/CSA-C22.2 No 1-M94 Audio, Video and Similar Electronic Equipment.
l
CAN/CSA-C22.2 No 950-95 Safety of Information Technology Equipment
l
Including Electrical Business Equipment.
UL 1419 Standard for Professional Video and Audio Equipment
l
73/23/EEC Low Voltage Directive.
l
UL 1950 Safety of information technology equipment Including Electrical Business
l
Equipment.
IEC60529 Classification of degrees of protection provided by enclosure (IP Code).
l
GOST 30631-99. General Requirements to machines, instruments and other
l
industrial articles on stability to external mechanical impacts while operating.
GOST R 50829-95. Safety of radio stations, radio electronic equipment using
l
transceivers and their components. The general requirements and test methods.
GOST 12.2.007.0-75. Electrotechnical devices. The general safety requirements.
l

8.6 EMC

The BTS3606A is compliance with the following EMC standards:
TS 25.105; 3rd Generation Partnership Project; TSG RAN WG4; UTRA (BS) TDD:
l
Radio transmission and reception89/336/EEC EMC directive Council directive of 3
May 1989 on approximation of laws of the Member States relating to
electromagnetic compatibility.
CISPR 22 (1997): Limits and methods of measurement of radio disturbance
l
characteristics of information technology equipment.
IEC 61000-6-1: 1997: Electromagnetic compatibility (EMC) - Part 6: Generic
l
standards - Section 1: Immunity for residential, commercial and light-industrial
environments.
IEC 61000-6-3: 1996: Electromagnetic compatibility (EMC) - Part 6: Generic
l
standards - Section 3: mission standard for residential, commercial and light
industrial environments.
IEC 61000-3-2 (1995): Electromagnetic compatibility (EMC) - Part 3: Limits -
l
Section 2: Limits for harmonic current emissions (equipment input current = 16 A).
K.27 (1996) Bonding
Chapter 8 Technical Standards
Configurations
8-3
System Description
and Earthing Inside a