COM600 3.3
20
Station Automation COM600
Operator's Manual
The password is not required to be the same as the current user's password so that
the password can be given to an authorized technician to remove the Hot Line Tag
if needed.
6. Check Block Status Update to block any updates sent to remote, local HMI, or
SCADA system.
7. Click Apply to apply Hot Line Tag.
Figure 3.6.3.1-1 Applying the Hot Line Tag
To remove the Hot Line Tag:
1. Open Switch Device Control Dialog by clicking the object on the single line dia-
gram.
2. Select the Hot Line Tag tab.
3. Enter the password.
4. Click Remove to remove the Hot Line Tag.
If you have forgotten your password, you can remove the tag
using the COM600 default password aEc2006rs.
1MRS756705
Hot_Line_Tag.bmp