Communication Structure - ABB COM600 Owner's/Operator's Manual

1MRS756705
3.5.2.
Station Automation COM600
Operator's Manual

Communication structure

You can open the communication view of HMI by clicking on the Communication tab
on the left. The communication structure is displayed in the window on the left. In the
communication structure you can see the OPC Server, communication channel objects
and the IEDs.
You can see the status of the IEDs in the communication structure. If there is a problem
in communication, there is a red cross next to the IED.
Figure 3.5.2-1 The communication view to HMI
Device and diagnostics information
By clicking the computer name at the top of the structure, the device information, such
as the hardware and software versions, is displayed in the window on the right side of
the tree. By clicking the OPC Server object name, corresponding device information is
displayed on the right. You can view device diagnostics information of the whole sub-
network by clicking the subnetwork object. To see the communication status or diagnostic
counter information of individual devices, click the IED objects.
COM600 3.3
communication_view.jpg
15