Global Suffix - Datalogic Magellan 9300i Product Reference Manual

Scanner and scanner-scale with imaging technology

Hide thumbs Also See for Magellan 9300i:

Table of Contents

Enter/Exit Programming Mode

Global Suffix

This feature applies to RS-232 interfaces (Standard, Wincor-Nixdorf, and Single

Cable). It specifies the suffix that is added to end of a label transmission. Three

standard options are available below. Contact your dealer for other alternate

settings for this feature.

To set the Global Suffix:

1. Scan the Enter/Exit Programming Mode bar code.

2. Scan your selection from the bar codes below.

3. Complete the programming sequence by scanning the Enter/Exit Pro-

031E0D00(CR)

Global Suffix = CR

No Global Suffix

CR — Carriage Return

CR LF — Carriage Return, Line Feed

gramming Mode bar code.

Global Suffix = No Global Suffix

031E0D0A00(CR)

Global Suffix = CR LF

Magellan™ 9300i / 9400i Scanners

Data Editing

Do you have a question about the Magellan 9300i and is the answer not in the manual?

Magellan 9400i