Table of Contents
Advertisement
Note
When memory is cleared the
dealer code will not be deleted
from panel memory.
If a dealer code has already
been programmed into the sys-
tem, use that code to change
the dealer code.
14
DEALER CODE (2nd Tier)
(Default = none, Parameters = 4 digits; 0-9)
The 4-digit dealer code is used to prevent unauthorized persons from changing the pro-
grammed central station phone numbers. When this feature is enabled, central station phone
numbers, pre-dial string, and downloader phone number cannot be changed (unless you enter
the program mode by using the dealer code). All other system settings are still accessible by
entering program mode with the installer code.
¾
To program a Dealer Code:
Š Enter 4-digit code and then press #.
¾
To delete a Dealer Code:
Š Press # twice. Once to delete the code and again to accept the command.
DURESS CODE (2nd Tier)
(Defaults = none, Parameters = 4 digits; 0-9)
The duress code is a unique 4-digit access code that allows users to operate the system and, at
the same time, instructs the panel to send a silent alarm report to the central station.
¾
To program a Duress Code:
Š Enter 4-digit code and then press #.
¾
To delete a Duress Code:
Š Press # twice. Once to delete the code and again to accept the command.
MANAGER (2nd Tier)
(Default = none, Parameters = 4 digits; 0 to 9)
The manager code functions the same as the primary code within the user programming menu,
and can arm or disarm the system.
¾
To program Manager Code:
Š Enter 4-digit code and then press #.
¾
To delete the Manager Code:
Š Press # twice. Once to delete the code and again to accept the command.
MAINTENANCE CODE (2nd Tier)
(Default = none, Parameters = 4 digits, 0 to 9)
The maintenance code is to be used in conjunction with the apartment manager keychain
touchpad. When a maintenance person needs access to a site protected by an Allegro, he can
press disarm on the apartment manager keychain touchpad, enter the premises, then disarm
using the maintenance code at the panel.
¾
To program the Maintenance Code:
Š Press #, enter the desired code and then press #.
¾
To delete the Maintenance Code:
Š Press # twice. Once to delete the code and again to accept the command.
Timers (1st Tier)
The TIMERS menu lets you set up the following 2nd tier timers for the Allegro system:
•
ENTRY DLY
•
EXIT DLY
•
AUTO PHONE TEST
•
QUIET TIME
•
QUIET HOUR
•
REARM TIMER
(CODES—)
(CODES—)
(CODES—)
(CODES—)
Installer Programming Menus
Hide quick links:
Advertisement
Table of Contents
