ABB ACH550 series User Manual page 55

E-Clipse Bypass Configurations for ACH550 Drives
Group 03
Code Name
0309 ALR WORD 2
Group 04
Code Name
0401 LAST FAULT
0402 F1 TIME 1
0403 F1 TIME 2
0404 F1 VOLTAGE
0405 F1
CURRENT
0406 F1 EVENT 1
0407 F1 E1 TIME
0408 F1 EVENT 2
Resolution Range
— b0: not used
b1: not used
b2: Override 1
b3: Override 2
b4: 1 = Start Enable 1
b5: 1 = Start Enable 2
b6: 1 = Start Enable 3
b7: 1 = Start Enable 4
b8: 1 = Mode auto lock
b9: 1 = Mode local lock
b10: 1 = Comm config error
b11: 1 = FIG parameter
configuration
b12: 1 = Drive faulted
b13 - b15: not used
Resolution Range
1 3001 - 3999
See 'Faults' page
1, days ago 0 - 65535
2, ago 00:00:00 - 23:59:58
1V 0 - 1200V
0.1A 0.0 - 6553.5A
— See parameter 501
2, before 00:00:00 - 23:59:58
1, days 0 - 9999
before
— See parameter 501
Default Description
0 Bypass alarm status, word 2
Default Description
0 Last fault declared
0 Time since last fault, days
0 Time since last fault, hr:min:sec
0 Input voltage at last fault
0 Motor current at last fault
0 Last event status before last fault
0 Time before last fault of last
event: hr:min:sec if time < 1 day
days if time >= 1 day
0 2nd to last event status before
last fault
Parameter Descriptions
53