M12 Connector For Connecting The Outputs Of The Position Feedback Module 6Dr4004-6J / 8J (-Z D53); M12 Connector For Connecting The External Position Detection System (-Z D54); M12 Connector For Connecting The Outputs Of The Sia Module 6Dr4004-6G /-8G (-Z D56) - Siemens SIPART PS2 Operating Instructions Manual

Connection
5.2 Electrical wiring
5.2.3.3 M12 connector for connecting the outputs of the position feedback module 6DR4004-6J /
8J (-Z D53)
You have a positioner with order suffix -Z order code D53. In this version of the positioner, the
M12 connector is used to electrically connect the current output of the position feedback
module.
Table 5-3
Current output terminal
61 (+)
Shield support of housing
62 (-)
5.2.3.4

M12 connector for connecting the external position detection system (-Z D54)

You have a positioner with order suffix -Z order code D54. In this version of the positioner, the
M12 connector is used to electrically connect the fitted EMC filter module (C73451‑A430‑D23).
Connect the external position detection system using the M12 connector.
Table 5-4
Terminal
POS (X1/2)
VCC (X1/4)
GND (X1/1)
VREF (X1/3)
5.2.3.5

M12 connector for connecting the outputs of the SIA module 6DR4004-6G /-8G (-Z D56)

You have a positioner with order suffix -Z order code D56. In this version of the positioner, the
M12 connector is used to electrically connect the outputs of the SIA module.
Table 5-5
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
86
Assignment diagram
Assignment diagram
Assignment diagram
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
3 - Blue
1 - Brown
4 - Black
2 - White
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC