Diagnostic Value '13.Prpst' - Time Since Last Partial Stroke Test - Siemens SIPART PS2 Operating Instructions Manual

Alarm, error, and system messages
10.2 Diagnostics
Description of indications
on the display:
Status messages:
Factory setting:
10.2.4.11

Diagnostic value '13.PRPST' - Time since last partial stroke test'

Indication on the display: ● ###
Purpose:
Status messages:
204
● OFF: The partial stroke test function is deactivated.
● C-ERR: Configuration error. Partial stroke test cannot be started.
Settings in the 'A1.STPOS start position', 'A3.STRKH stroke
height' and 'A4.STRKD stroke direction' are not plausible.
● FdInI - Failed PST Initialization: The reference stroke time
measurement of the partial stroke test has failed.
● notSt - No Test: A partial stroke test has not yet been executed.
● ###.#: Corresponds to the measured stroke time in seconds. The
last partial stroke test was successfully executed.
● SdtSt - Stopped Test: The last partial stroke test was interrupted.
● FdtSt - Failed Test: The last partial stroke test has failed.
The following status messages appear when you hold the
pressed:
● notoL - No Tolerance: The control valve is beyond the tolerance
range to start the partial stroke test. A manual partial stroke test
is not started.
● Strt - Start: A manual partial stroke test is started five seconds
after pressing the button.
● StoP - Stop: The current partial stroke test is interrupted. 'WAIT'
is output in the display.
OFF
● notSt
● Sdtst
● FdtSt
This diagnostics parameter shows the elapsed time in days since
the last partial stroke test.
● notSt - No Test: A manual partial stroke test has not yet been
executed.
● SdtSt - Stopped Test: The last partial stroke test was interrupted.
● FdtSt - Failed Test: The last partial stroke test has failed.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
button