Replacing A Sic - HP FlexNetwork MSR3064 Installation Manual

Figure 67 Removing the CF card
1
Install a new CF card. For the installation procedure, see "Installing the router."
3.
If you do not install a new CF card, close the CF card cover.

Replacing a SIC

CAUTION:
SIC interface modules are not hot swappable. Make sure the router is powered off before installing a
SIC.
To replace a SIC:
Completely loosen the captive screws of the SIC.
1.
Gently pull the SIC out along the slide rails.
2.
Install a new SIC. For the installation procedure, see "Installing the router."
3.
If you do not install a SIC, install a filler panel and tighten the screws.
2
49
3