Replacing A Cf Card - HP FlexNetwork MSR3064 Installation Manual

Install a new air filter. For the installation procedure, see "Installing the router."
3.
To remove the slide rails, completely loosen the fastening screws of the slide rails.
To install new slide rails, see "Installing the router."
Figure 66 Removing slide rails

Replacing a CF card

CAUTION:
Execute the umount cfb0: command before you remove the CF card if the router is powered on.
To replace a CF card:
Press down the spring clip of the CF card cover and open the cover.
1.
Press the eject button to eject the CF card part-way out of the CF card reader, and then pull the
2.
CF card out of the CF card reader.
Keep the removed CF card for future use.
48