HP FlexNetwork MSR3064 Installation Manual page 24

Remove the two grounding screws from the rear panel of the chassis.
1.
Attach the grounding screw to the ring terminal of the grounding cable. See
2.
Use a Phillips screwdriver to fasten the grounding screw into the grounding screw hole.
3.
Remove the grounding screw from the grounding point on the rack.
4.
Use a needle-nose pliers to bend a hook at the other end of the grounding cable, attach it to the
5.
grounding point, and secure it with a screw. See
Figure 21 Connecting the grounding cable to the grounding hole of the router
Figure 22.
19
Figure 21.