Using the GOT Mobile Function
STEP6
Transferring project data
STEP6 Transferring project data
1. Connecting the personal computer to the GOT
Connect the personal computer to the GOT with a USB cable.
Personal computer
*
The USB driver must be installed to enable USB communication with the GOT.
The USB driver is automatically installed in the personal computer at the first connection.
Data can also be transferred with connection methods other than a USB cable or by using an SD memory card.
Refer to the GT Designer3 (GOT2000) Help for details on connection methods other than a USB
cable and for transferring data by using an SD memory card.
18
Transferring project data
USB cable
(GT09-C30USB-5P)
Connect to a
USB interface
GOT
Open the front cover and
connect the cable to the
USB interface.