In The Event Of Gas Leak And Disconnection; In The Event Of Fire And Disconnection - Panasonic 1M Operation Manuals

In the Event of Fire and Disconnection

Note Use the system after confirming that each
device is properly installed.
If the heat detector is disconnected
If the heat detector is disconnected from the
system, the base unit and the cordless
handset of the door phone report the event.
(beep beep)
Fire detector
fault indicator
lighting in red
電源
POWER
Fire lamp
lighting
in red
The fire detector fault indicator will turn off
after about 1 minute and the periphery of the
MENU button will flash in red.
If the detector is restored, the alarm sound
automatically stops and the periphery of the
MENU button, fire lamp and the alarm
indication lamp on the handset of the door
phone will turn off.
Touching on the Confirm button will take you
back to the standby screen, and the periphery of
the MENU button will light up in red.
Pressing the MENU button will not take you back
to the fire detector fault indication screen. If you
want to keep displaying the fire detector fault
indication, touch
The periphery of the MENU button and fire
●
Note
lamp will keep flashing until the heat detector
is connected again.
It is also possible to turn off the fire detector
●
fault indicator within 1 minute. (
How to stop the alarm sound
Press the Alarm Stop button. (It is also
possible to stop the alarm sound from the
manager room )
Measures taken when alarm is sounding
Contact the company that installed the system
or the administrating company.
Installer
Setting
It is also possible to disable the alarm feature.
Consult with the company that installed the
system or the administrating company.
78
Alarm Stop button
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
MENU button
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
Handset of the door phone
OFF
Alarm indicator lamp
火災 Gas Not Home Alarm Lock
FIRE GAS NOTHOME SET OPEN
Flashing in red
解錠
UNLOCK
Alarm sounding
通話
TALK
on the top menu.
Page 75)
In the Event of
Use the system after confirming that
Note
each device is properly installed.
In the Event of Gas Leak
When the gas detector detects gas leak, the
base unit and the cordless handset of the door
phone report the event.
電源
Fire FIRE ガス GAS Not Home NOTHOME Alarm
POWER
Gas indicator
flashing in
yellow
(rapid beeps) Gas Leak.
電源
Fire ガス Not Home Alarm
FIRE GAS NOTHOME
POWER
Gas indicator
flashing in
yellow
The gas indication will turn off after
approximately 3 minute and the periphery of
the MENU button will flash in red.
If gas is not detected anymore, the alarm message
automatically stops and the periphery of the MENU
button, gas indicator and the alarm indicator lamp
on the handset of the door phone will turn off.
The periphery of the MENU button, gas
Note ●
indicator and alarm indicator lamp will keep
flashing until there is no gas in the gas detector.
It is also possible to turn off the gas
●
indication within 3 minutes. (
How to stop the alarm message
Press the Alarm Stop button. However, the
alarm sound of the gas detector does not stop.
Measures taken when alarm is sounding
Shut off the main gas valve and open the
windows and doors to ventilate the room.
Cautions
The gas detector may generate an erroneous
report if it gets, for example, moisture form
sweet cooking rice wine, soy sauce, and
alcoholic drink such as wine.
非常
Alarm Stop button
EMERG.
復旧/警報音停止
RESET/STOP ALARM
MENU button
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
SET Lock OPEN
解錠
UNLOCK
通話
TALK
After about 40 seconds
Alarm Stop button
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
Gas indicator
火災
確認
FIRE CONFIRM flashing in yellow
メニュー
MENU
終了
Handset of the door phone
OFF
Alarm indicator lamp
Lock
SET OPEN
Flashing in red
解錠
UNLOCK
Alarm sounding
通話
TALK
Page 75)