Private Security Number Setting - Panasonic 1M Operation Manuals

Note
● Be sure take a note of the Security Number in the "Note of Security Number" on page 49 as a reminder
in case you forget it.
● The "Private Security Number Setting" indicator will not be displayed unless the setting has been made
on the Controller.
(Please contact the store responsible for installation or the service and maintenance company)
●The procedure for User 2 to User 4 is the same as for User 1.
●The Private Security Number is set by selecting four digits between 0 and 9.
1
Touch
The Private Security Number Setting Screen
is displayed.
For how to start the settings, please see
page 50.
2
On the Private Security Number
Setting Screen, touch
the content you wish to set
3
Select one of "On/Off" and touch
When set to "On"
Enter the 4-digit Private Security
1
Number using the keypad
Note
2 2 Touch
Note
The Private Security Number for User 1
is now set. The display returns to the
Private Security Number Setting Screen.
When set to "Off" (factory default setting)
The display returns to the Private
Security Number Setting Screen.
4
Finish settings
Press
(state in which nothing is displayed on the screen).
68

Private Security Number Setting

on the Setting Screen
If you make a mistake as you enter
the number, touch
This will clear all numbers.
Please note down the Security
Number you have entered in Note
of Security Number on page 49.
(OFF Button) to go to the standby state
終了
for
1
.
Touch
any one
1
Touch
the keypad
Setup screen
Private Security Number Setting Screen
User 1Setting Screen
*This shows the case of User 1.
終了
OFF
Touch
Touch
any one
2
Touch
2 Touch